LICENSED

LICENSED, BONDED, INSURED

4800A HELFRICK ROAD

BILLINGS, MT 59101

PHONE: 406-245-3128

FAX: 406-245-8834

www.hardrives-asphalt.com

email: jbi@hardrives-asphalt.com

MATERIAL SAFTEY DATA SHEET

J.B. INDUSTRIAL, INC.

Product Name: STEELCOAT™

HEALTH HAZARD DATA - SECTION V

Hazardous Materials Identification Systems (HMIS) Ratings

NON-HAZARDOUS MATERIAL

Heath: 0 Fire: 0 Reactivity: 0

(4=Extreme, 3=High, 2=Moderate, 1=Slight, 0=Insignificant)

FIRST AID

If in Eyes:

Flush with large amounts of water

DIVISION AND LOCATION

If on Skin:

Wash with soap and water or use waterless

Division :

J.B. Industrial, Inc.

hand cleaner

Location:

4800 Helfrick Road

If Breathed:

None

Billings, MT 59101

If Swallowed:

DO NOT INDUCE VOMITING.

Telephone:

(406) 245-3128

CONSULT a physician.

Contact Person:

Jim Bailey Enviornmental/ Safety Officer

CHEMICAL AND PHYSICAL PROEPRTIES - SECTION II

REACTIVITY DATA - SECTION VI

Hazardous Polymerization:

Will not occur

Chemical Name: Asphalt Emulsion

Stability:

Stable

Chemical Family: Hydrocarbons

Conditions to Avoid:

None

HAZARDOUS INGREDIENTS:

Threshhold Limit

SPILL OR LEAK PROCEDURES - SECTION VII

Ingredient

CAS No.

Percent

Value (Units)

Procedures for Clean-Up: Contain spill immediately in

Petroleu Asphalt

8052-42-2

>20%

N/A

smallest area possible. Recover as much product as

H2o

<45%

possible. Residual fluid should be soaked up by use of

Cellulose

< 5%

an absorbant material. Sweep up and dispose of in

Siliceous Material

>30%

accordance with Federal, State, and Local Regulations.

No solvents are used in the manufacturing or distribution of

Waste Disposal Method: Recycle as much of the

this product.

recoverable product as possible. Dispose of non-

recyclable material by such methods as controlled

PHYSICAL DATA - SECTION III

incineration or blending with aggregate and used for

Physical Description:

Brown Liquid

patching and other maintenance use>

Boiling Point:

212° F

Solubility in Water:

Soluble

Specific Gravity:

1.30

PROTECTIVE EQUIPMENT TO BE USED - SECTION VIII

Percent Volatile by Volume:

Respiratory Protection:

None required for normal

Evaporation Rate:

No Data Available

conditions of use

Reactivity in Water:

None

Ventilation:

Normal Ventilation

Vapor Density (Air @ 1):

.65

Protective Gloves:

Standard saftey procedures

Eye Protection:

Standard saftey procedures

FIRE AND EXPLOSION DATA - SECTION IV

Flash Point (closed cup):

None unless water is removed

TRANSPORTATION AND STORAGE - SECTION IX

Explosive Limits:

No Data Available

Storage Conditions:

Non-hazardous Material

Auto-Iginition Temperature:

No Data Available

Shipping Information:

DOT:

Not Regulated

Fire Point:

No Data Available

IOTA/IMP:

Not Regulated

Extinguishing Media:

No Data Available

Non-flammable in Emulsion State

The above data is based on tests and experience which J.B. INDUSTRIAL, INC. believes reliable and are supplied for

informational purposes only. J.B. INDUSTRIAL, INC. disclaims any liability for damage or injury which results from the use

of the above data and nothing contained therein shall constitute a guarantee, warranty (including Warranty of Merchantability)

or representation (including freedom from patent liability) by J.B. INDUSTRIAL, INC. with respect to data, the product

described or their use for and specific purpose, even if that purpose is known to J.B. INDUSTRIAL, INC.