|
|
LICENSED, BONDED, INSURED |
|
4800A HELFRICK ROAD |
|
BILLINGS, MT 59101 |
|
PHONE: 406-245-3128 |
|
FAX: 406-245-8834 |
|
www.hardrives-asphalt.com |
|
email: jbi@hardrives-asphalt.com |
|
MATERIAL SAFETY DATA SHEET |
|
J.B. INDUSTRIAL, INC. |
|
Product Name: STEELCOAT™ |
|
|
HEALTH HAZARD DATA - SECTION V |
|
|
|
|
|
|
|
|
|
|
|
|
|
Hazardous Materials Identification Systems (HMIS) Ratings |
|
NON-HAZARDOUS MATERIAL |
|
Heath: 0 Fire: 0 Reactivity: 0 |
|
|
|
|
|
|
|
(4=Extreme, 3=High, 2=Moderate, 1=Slight, 0=Insignificant) |
|
FIRST AID |
|
|
|
|
|
|
|
If in Eyes: |
Flush with large amounts of water |
|
DIVISION AND LOCATION |
|
If on Skin: |
Wash with soap and water or use waterless |
|
Division : |
J.B. Industrial, Inc. |
|
|
|
hand cleaner |
|
|
|
Location: |
4800 Helfrick Road |
|
If Breathed: |
None |
|
|
|
|
|
|
Billings, MT 59101 |
|
If Swallowed: |
DO NOT INDUCE VOMITING. |
|
|
Telephone: |
(406) 245-3128 |
|
|
|
CONSULT a physician. |
|
|
Contact Person: |
Jim Bailey Environmental/ Safety Officer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHEMICAL AND PHYSICAL PROPERTIES - SECTION II |
|
REACTIVITY DATA - SECTION VI |
|
|
|
|
|
|
|
Hazardous Polymerization: |
Will not occur |
|
Chemical Name: Asphalt Emulsion |
|
Stability: |
|
|
Stable |
|
|
Chemical Family: Hydrocarbons |
|
|
Conditions to Avoid: |
|
None |
|
|
HAZARDOUS INGREDIENTS: |
|
|
|
|
|
|
|
| |
|
|
|
Threshhold Limit |
|
SPILL OR LEAK PROCEDURES - SECTION VII |
|
Ingredient |
CAS No. |
Percent |
Value (Units) |
|
Procedures for Clean-Up: Contain spill immediately
in |
|
Petroleu Asphalt |
8052-42-2 |
>20% |
N/A |
|
smallest area possible. Recover as much product as |
|
H2o |
|
|
<45% |
|
|
possible. Residual fluid should be soaked up by use of |
|
Cellulose |
|
< 5% |
|
|
an absorbent material. Sweep up and dispose of in |
|
Siliceous Material |
>30% |
|
|
accordance with Federal, State, and Local Regulations. |
|
|
|
|
|
|
|
|
|
|
|
|
|
No solvents are used in the manufacturing or distribution of |
|
Waste Disposal Method: Recycle as much of the |
|
this product. |
|
|
|
|
recoverable product as possible. Dispose of non- |
|
|
|
|
|
|
|
recyclable material by such methods as controlled |
|
PHYSICAL DATA - SECTION III |
|
incineration or blending with aggregate and used for |
|
Physical Description: |
Brown Liquid |
|
patching and other maintenance use> |
|
|
Boiling Point: |
|
212° F |
|
|
|
|
|
|
|
|
Solubility in Water: |
Soluble |
|
|
|
|
|
|
|
|
Specific Gravity: |
1.30 |
|
|
PROTECTIVE EQUIPMENT TO BE USED - SECTION VIII |
|
Percent Volatile by Volume: |
0 |
|
|
Respiratory Protection: |
None required for normal |
|
Evaporation Rate: |
No Data Available |
|
|
|
conditions of use |
|
|
Reactivity in Water: |
None |
|
|
Ventilation: |
|
Normal Ventilation |
|
|
Vapor Density (Air @ 1): |
.65 |
|
|
Protective Gloves: |
Standard safety procedures |
|
|
|
|
|
|
|
Eye Protection: |
Standard safety procedures |
|
FIRE AND EXPLOSION DATA - SECTION IV |
|
|
|
|
|
|
|
Flash Point (closed cup): |
None unless water is removed |
|
TRANSPORTATION AND STORAGE - SECTION IX |
|
Explosive Limits: |
No Data Available |
|
Storage Conditions: |
Non-hazardous Material |
|
Auto-Ignition Temperature: |
No Data Available |
|
Shipping Information: |
DOT: |
Not Regulated |
|
Fire Point: |
|
No Data Available |
|
|
|
IOTA/IMP: |
Not Regulated |
|
Extinguishing Media: |
No Data Available |
|
|
|
|
|
|
|
|
|
|
Non-flammable in Emulsion State |
|
|
|
|
|
|
The above data is based on tests and experience which J.B. INDUSTRIAL,
INC. believes reliable and are supplied for |
|
informational purposes only. J.B. INDUSTRIAL, INC. disclaims any
liability for damage or injury which results from the use |
|
of the above data and nothing contained therein shall constitute a
guarantee, warranty (including Warranty of Merchantability) |
|
or representation (including freedom from patent liability) by J.B.
INDUSTRIAL, INC. with respect to data, the product |
|
described or their use for and specific purpose, even if that purpose is
known to J.B. INDUSTRIAL, INC. |
|